Make Soldered Connections
Using the sequences from Getting Started, and techniques illustrated in the video clips below, make a series of solder connections
- Solder 2 wires
- Solder a wire to an LED lead
- Solder a wire to a low voltage bulb
Follow these steps
- Prep the material
- Tin the leads / wires
- Make the mechanical join
- Solder the components
The following video clips illustrate techniques. Tinning is done in each soldering video.
Video | Low Res | High Res |
---|---|---|
Stripping a Wire | ||
Cleaning a Soldering Iron Tip | ||
Soldering a Resistor to an LED | ||
Soldering a Wire to a Bulb |
When you are done, make an entry in your course portfolio